These Urinalysis Reagent Strips are brand new from the manufacturer. You will receive 5 sealed foil packets, each containing 5 test strips. The strips will test for 10 different parameters which are listed below.
The Professional Doctor/GP 10 parameter urinalysis reagent test strips are intended solely for use by medical professionals who will know how to correctly interpret the results.Test results may provide information regarding the status of carbohydrate metabolism, kidney and liver function, acid-base balance and bacteriurea.
Please refer to the pouch label for the specific test parameters of the product you are using.
The tests will have at least 6 months to expiry but please note that once the pouch has been opened, all the tests within that pouch should be used within 1 hour. If you feel that 25 tests is too many then we also offer different quantities which are listed below. Just click on the pack size that suits you to be taken straight to that page.
1 x Test Pack
2 x Test Pack
5 x Test pack
2 x 5 Test Packs (10 test strips in total)
What results will I get?
These strips are meant for medical professionals and they will fully understand the purpose of these tests and how to interpret the results as they are standard urinalysis strip tests.
Effectively any positive result for any of the tests will require further investigation unless the likely cause of the positive result is already known e.g. blood in urine can be a normal result if the urine is from a menstruating female.
Do not touch test areas of Urinalysis Reagent Strips.
Do not open sealed pouch until ready to use.
The use of urine preservatives can prevent the decomposition of ketone, bilirubin and urobilinogen in the urine.
Do not store the sample no longer than 1 hour before testing.
Comparison to the colour chart is dependent on the interpretation of the individual and must ideally be read by a Doctor or health care professional.
Interpretation of results are read at users own risk.
All strips must be used at once when a pouch has been opened.
Specimen Collection and Preparation
Collect fresh urine in a clean container and test as soon as possible. Do not centrifuge. If testing cannot be performed within one hour after collection of urine, refrigerate the specimen immediately. Allow refrigerated specimen to return to room temperature before testing.
Store at room temperature between 2-30C(35.6F-86F).
Leave away form direct sunlight and moisture.
Do not use after expiration date.